You are here

Welcome to Norwood Connect

“Norwood Connect”, established in 2002, is one of the very first forums dedicated to portable sawmills, forest management and wood-processing.  Since then, it has become the essential “go-to” place for thousands of sawmilling enthusiasts from all over the world.

“Norwood Connect” gives sawmill owners, and people interested in getting into sawmilling, a central place where they can discuss milling, exchange ideas and know-how, and share stories.

We invite you to join “Norwood Connect” and connect with thousands of fellow sawyers.  It’s absolutely free – always has been and always will be.

Welcome!

 

Topic / Topic starter Replies Views Last postsort ascending
Normal topic Used Blades $2 each
by Scott Shaeffer » Sun, 09/10/2017 - 17:32
1
1,103 by Post Oakie
Thu, 09/14/2017 - 08:05
Normal topic Getting it sorted out
by oneoldcoot » Thu, 09/07/2017 - 16:09
4
1,644 by r.garrison1
Sat, 09/09/2017 - 02:41
Hot topic Loading Ramps (Page: 1, 2)
by Daryl B » Wed, 12/18/2013 - 20:36
41
29,713 by wayne busse
Fri, 09/08/2017 - 18:08
Normal topic What is going on with Norwood?
by btadams1 » Fri, 09/08/2017 - 15:50
2
1,546 by wayne busse
Fri, 09/08/2017 - 17:53
Normal topic my future log home
by Brad Robinson » Fri, 05/05/2017 - 11:25
10
4,038 by wayne busse
Fri, 09/08/2017 - 14:06
Normal topic Which winch ? No, which hoist ?
by wayne busse » Wed, 12/07/2016 - 01:27
6
3,454 by r.garrison1
Fri, 09/08/2017 - 01:17
Normal topic another look at home made log rests
by wayne busse » Sat, 03/25/2017 - 16:59
7
3,676 by wayne busse
Thu, 09/07/2017 - 23:56
Hot topic Blade binding and wavy in large Maple
by Barbs1 » Tue, 08/29/2017 - 13:28
24
6,737 by r.garrison1
Tue, 09/05/2017 - 21:10
Normal topic Old MKII Lumbermate mill
by Idaho Sawer » Mon, 09/04/2017 - 20:30
1
1,018 by Post Oakie
Tue, 09/05/2017 - 09:21
Normal topic Photo#uckit , whoops I meant photobucket.
by wayne busse » Sat, 08/12/2017 - 18:31
12
4,239 by at1stpromise
Mon, 09/04/2017 - 17:40
Normal topic Trailering your mill
by rickcnc » Wed, 08/30/2017 - 06:42
2
1,404 by r.garrison1
Mon, 09/04/2017 - 14:55
Normal topic PARTS
by s78wingrider » Mon, 08/14/2017 - 10:47
2
1,341 by s78wingrider
Fri, 08/25/2017 - 10:54
Normal topic Head cable replacement
by Bill » Fri, 07/28/2017 - 16:02
13
4,600 by Post Oakie
Fri, 08/25/2017 - 09:02
Hot topic new owner (Page: 1, 2)
by Grandpa » Wed, 12/21/2016 - 09:43
42
16,176 by Grandpa
Wed, 08/23/2017 - 09:42
Normal topic log in problems
by oneoldcoot » Mon, 08/14/2017 - 15:33
1
959 by jmanatee
Mon, 08/14/2017 - 16:14
Normal topic Log loader ramps and manual hydraulic
by at1stpromise » Mon, 07/17/2017 - 23:25
8
3,137 by r.garrison1
Thu, 08/10/2017 - 18:26
Normal topic centrifugal clutch HD36
by rickcnc » Sat, 08/05/2017 - 07:46
3
1,646 by smithbr
Mon, 08/07/2017 - 07:47
Hot topic no more goldline blades
by simooner » Sat, 05/27/2017 - 10:24
15
5,548 by smithbr
Mon, 08/07/2017 - 07:42
Hot topic HD36 Manual or Full Hydraulic
by Mac-Elle » Wed, 03/01/2017 - 22:39
17
6,159 by rickcnc
Sat, 08/05/2017 - 07:48
Normal topic hd36/hydraulic pressure settings
by Chaddrews » Fri, 07/21/2017 - 21:45
2
1,250 by Bill
Fri, 08/04/2017 - 19:27
New posts
No new posts
Hot topic with new posts
Hot topic without new posts
Sticky topic
Locked topic