You are here

63 posts / 0 new
Last post
sawwood
sawwood's picture

Eddiemac our solar kiln is falling apart, wood rotting and plywood rotting too. I don't think JR put platic cover on the inside befor the plywood.Is this the reason

for the wood to rot ? How much water do you see in your kiln, and if sohow do you get read of it ? We may have to rebuild one next year so would like to stop by

and take a look at yours.  Thanks,  Sawwood

eddiemac
eddiemac's picture

I never see water inside the kiln unless the roof is leaking. But then I always air-dry first; maybe I would see water if I started with green wood.  It gets so hot in the kiln though, and with the fans blowing during the day, the moisture must either evaporate or escape through the vents.  My inner walls are coated with a thick black sealant that can be found in the roofing section at any building supply store.  I'm hoping it protects the inside of the walls; I didn't use plastic under the wall plywood, relying instead on the coating and the kraft paper barrier on the fiberglass insulation.  Plastic sheeting does protect my floor though, which is 3/4" treated plywood.  You are welcome to stop by  -  send me a message and we'll arrange a time.

Pages